D-Link DGS-1210-52MP L2/L3 Smart+ PoE switch, 48x GbE PoE+, 4x RJ45/SFP, PoE 370W

Product description

DGS-1210-52MP: 52-Port Gigabit Max PoE Smart Managed Switch including 4 SFP ports (48 x PoE ports, fan) Features Green Technology Power saving via the following features: Link Status detection LED Shut-Off Port Shut-Off System Hibernation Time-based PoE (DGS-1210-10P/28P/52P/52MP only) Security Features Access Control List secures network D-Link Safeguard Engine protects CPU from Broadcast/Multicast/Unicast Flooding Port Security supports 64 MACs per port ARP Spoofing Prevention Intuitive Management D-Link Network Assistant Utility or Web-based GUI Built-in SNMP MIB for remote NMS (D-View 6.0) Compact CLI through Telnet Advanced Features Auto Surveillance VLAN Loopback Detection automatically disables a port when a loop is detected Cable Diagnostics allows administrators to determine cable status SFP ports for flexibility Auto MDI/MDIX Interface Number of 10/100/1000BASE-TX ports DGS-1210-52/52P/52MP - 48 ports Number of SFP ports DGS-1210-20/28/28P/28MP/52/52P/52MP - 4 ports PoE Supported Models (Standard(s)/Number of Ports/Maximum Power Budget) DGS-1210-52MP (802.3af/802.3at/52 ports/370W) Performance Switch Capacity DGS-1210-52/52P/52MP - 104 Gbps 64-Byte Packet Forwarding Rate DGS-1210-52/52P/52MP - 77.4 Mpps MAC Address Table Size 16K Packet Buffer DGS-1210-52/52P/52MP - 3 MB per device Jumbo Frame Up to 9,216 Bytes Physical & Environmental Power Consumption (Standby/Maximum) DGS-1210-52MP - 48.9W / 483.1W (PoE) Power Input 10 to 240 VAC, 50/60HZ internal universal power supply Dimensions (W x D x H) DGS-1210-52MP - 440 x 430 x 44 mm Weight DGS-1210-52MP - 5.78 kg Ventilation DGS-1210-52MP - smart fans Heat Dissipation DGS-1210-52MP - 1,648.23 BTU per hour Temperature Operating: -5° to 50°C (23° to 112°F) Storage: -20° to 70°C (-4° to 158°F ) Humidity Operating: 0% ~ 95% non-condensing Storage: 0% ~ 95% non-condensing Certification CE Class A, VCCI Class A, FCC Class A, cUL, CE (LVD), BSMI, CCC, C-Tick Software Feature L2 Features MAC Address Table 16K entries IGMP Snooping IGMP v1/v2 Snooping Supports 256 IGMP groups Supports at least 64 static multicast addresses IGMP per VLAN Supports IGMP Snooping Querier Loopback Detection 802.3ad Link Aggregation: DGS-1210 28/28P/28MP: Maximum of 14 groups/8 ports per group DGS-1210 52/52MP/52P: Maximum of 26 groups/8 ports per group DGS-1210 -10/10P: Maximum of 5 groups/8 ports per group LLDP LLDP-MED Jumbo Frame Up to 9,216 bytes Spanning Tree Protocol 802.1D STP 802.1w RSTP 802.1s MSTP (for DGS-1210-28MP only) Flow Control 802.3x Flow Control HOL Blocking Prevention Port Mirroring One-to-One Many-to-One Supports Mirroring for Tx/Rx/Both Multicast Filtering Forwards all unregistered groups Filters all unregistered groups Configurable MDI/MDIX MLD snooping v1/v2 (256 groups) VLAN 802.1Q VLAN Group Max. 256 static VLAN groups Configurable VID from 1 - 4094 Asymmetric VLAN Auto Voice VLAN Max. 10 user-defined OUI Max. 8 default OUI Auto Surveillance VLAN Quality of Service (QoS) 802.1p Quality of Service 8 queues per port Queue Handling Strict Weighted Round Robin (WRR) Bandwidth Control Port-based (Ingress/Egress, min granularity 10/100/1000 is 64 Kbps) QoS based on: 802.1p Priority Queues DSCP ToS IPv6 Traffic Class TCP/UDP port L3 Features IP Interface Supports 1 interface IPv6 Neighbor Discovery (ND) Static Routing (for DGS-1210-28MP only) 64 IPv4 Static Route Entries 32 IPv4 Static Route Entries Access Control List (ACL) Max. 50 access list Max. 768 rules shared by IPv4, MAC and IPv6 Each rule can only be associated with a single port ACL based on 802.1p priority VLAN MAC address Ether type IP address DSCP Protocol type TCP/UDP port number IPv6 Traffic Class Security Broadcast/Multicast/Unicast Storm Control D-Link Safeguard Engine DHCP Server Screening IP-MAC-Port Binding (Smart Binding) Supports 512 address binding entries ARP Inspection ARP + IP Inspection Supports DHCP Snooping 802.1X Port-based Access Control ARP Spoofing Prevention Max. 64 entries Traffic Segmentation SSH v2 SSL Supports v1/v2/v3 Port Security Supports up to 64 MAC addresses per port Duplicate address detection AAA 802.1X Authentication Supports local/RADIUS database Supports port-based access control Supports EAP, OTP, TLS, TTLS, PEAP IPv6 RADIUS Server Support MD5 authentication MIB/RFC Standards RFC 783 TFTP RFC 951 BootP/DHCP Client RFC 1157 SNMP v1, v2, v3 RFC 1213 MIB II RFC 1215 MIB Traps Convention RFC 1350 TFTP RFC 1493 Bridge MIB RFC 1769 SNTP RFC 1542 BootP/DHCP Client RFC 1901 SNMP v1, v2, v3 RFC 1907 SNMP v2 MIB RFC 1908 SNMP v1, v2, v3 RFC 2131 BootP/DHCP Client RFC 2138 RADIUS Authentication RFC 2139 RADIUS Authentication RFC 2233 Interface Group MIB RFC-2246 SSL RFC 2475 RFC 2570 SNMP v1, v2, v3 RFC 2575 SNMP v1, v2, v3 RFC 2598 CoS RFC 2618 RADIUS Authentication RFC 2819 RMON v1 RFC 2865 RADIUS Authentication RFC 3164 System Log RFC 3195 System Log RFC 3411-17 SNMP D-Link Private MIB LLDP MIB Zone Defense MIB 2233 Interface Group MIB OAM Cable Diagnostics Factory Reset Management Web-based GUI D-Link Network Assistant Utility Compact CLI Telnet Server TFTP Client Configurable MDI/MDIX SNMP Supports v1/v2c/v3 SNMP Trap Backup/Upgrade firmware Smart Wizard Upload/Download Configuration file System Log Max. 500 log entries BootP/DHCP Client SNTP ICMP v6 IPv4/v6 Dual Stack DHCP Auto Configuration Time Setting SNTP RMONv1 Trusted Host Green V3.0 Technology Power Saving by: Link Status Time-based PoE: PoE ports can be turned on/off by port or system through schedule LED Shutoff System Hibernation Port Shutoff